Industrial Hydraulic Concrete Placing Boom Floor Or Shaft Climbing ISO9001 Certification
Features
Optimal design of boom-&column-structure ,Inner hydraulic oil tank renders a compact placement.
The key components of hydraulic- and electrical-system are from world famous brand,which ensure safety and stability.
For option:
1. Standard types without counter weight
2. Floor or shaft climbing
3. Step speed or stepless speed(proportional control)
4. Column length:5m,8m,10m
5. Delivery pipes for option as project budget:
⑴ Ordinary single straight pipe and cast steel bend,service life not more than 20,000m3 ；
⑵ High wear resistance double straight pipe and bend,service life not less than 50,000m3；
| Technical Specifications |
| Model of placing boom | HGY36S-4R | HGY36P-4R | HGY36SC-4R | HGY36PC-4R |
| Performance | Max. radius (m) | 36 |
| Free standing height,Slewing range | 22.7m,400° |
| Working temperature(℃) | 0～60℃ |
| Counter weight(kg) | / | 2930 |
| Total weight(kg) | 25000 | 27930 |
| Supply power to equipment | 380V/50Hz |
| Electric motor | Motor model | Y2-200L-4 |
| Power(kW) | 30 |
| Hydraulic system | System pressure(MPa) | 32 |
| Flow(L/min) | 34 | 47 | 34 | 47 |
| Oil tank capacity(L) | 280 |
| Control mode | (Cable+Radio) remote control |
| Clearing mode for concrete pipe | Water clear / Dry clear |
| Section of tubular column (m×m) | 0.75×0.75 |
| Arm(Booms) | Boom model | fully hydraulic foldable arms |
| Delivery pipeline diameter | DN125mm |
| Length of end hose (〃×m) | 5〃×3 |
| The first section | Length(m) | 12.3 |
| Articulation | -2.5°～82.5° |
| The second section | Length(m) | 7.9 |
| Articulation | 0°～180° |
| The third section | Length(m) | 7.9 |
| Articulation | 0°～180° |
| The forth section | Length(m) | 7.9 |
| Articulation | 0°～180° |
| Climbing | Climbing mode | Cylinder Jack Lifting |
| Internal climbing step distance(m) | 0.52 |
| Floor frame | Hole prepared in floor |
| Shaft frame | Size of climbing shaft : 2.0m-2.7m |
| Min. space between internal climbing frame | Climbing(m) | 3 |
| Placing concrete(m) | 6 |
| Rest(m) | 6 |
The difference between step speed and stepless speed regulation of placing boom
Step speed and stepless speed regulation here refer to the control mode of the arm movement of the placing boom.
"Step speed regulation" is to adjust the flow of oil into and out of each boom cylinder through the throttle valve (naturally converted into the telescopic speed of cylinder), which will remain unchanged during the boom movement.
The operation switch of the remote control only plays the role of "open" or "close" to the electromagnetic directional valve in the hydraulic circuit. Therefore, also known as "switch quantity" speed regulation;
"Stepless speed regulation" means that the oil flow in and out of each boom cylinder can be adjusted with the remote control switch (naturally converted into the telescopic speed of cylinder). In the boom movement process, this speed changes fast or slow with the lever's pulling range.That is to say, there is a corresponding "proportional relationship" between the telescopic speed of the cylinder and the actuating range of the lever. Therefore, this "stepless speed regulation" is also known as "proportional control".
ZOOMWOLF concrete placing boom model S is step speed regulation, such asHGY33S-3R; model P is stepless speed regulation, such asHGY33P-4R.
The cost of step speed regulation is relatively low, but its stability is not as good as stepless speed regulation. Stepless speed regulation has good stability, but the cost is relatively high.
About the model
HGY ×× S or P C or blank - × R
① ② ③ ④ ⑤
① Hydraulic concrete distributor
② Round number of Max.radius(m)
③ Step speed regulation(S)or
Proportional control speed regulation(P)
④ With(C)or without(blank) counter weight
⑤ Arm section number ×Roll folding(R)
【Identification letter description】
S: Step-speed adjustment
P: Proportional (Stepless speed regulation)
C: Counter weight
【The sample】
1. Model HGY33S-3R means:
Without counter weight,max.radius 33m,step speed regulation and 3 roll-folding arms.
2. Model HGY33PC-4R means:
With counter weight,max.radius 33m, proportional control speed regulation and 4 roll-folding arms.
Product Tags:
|
|
Industrial Hydraulic Concrete Placing Boom Floor Or Shaft Climbing ISO9001 Certification Images
|
